- May 3, 2016
- 3
- 0
- 1,510
ok so i have recently built this rig for gaming. I have a mild overclock 4400mhz 1.34v and seems stable so far running P95 my temps are being a bit unruly under load though. at idle they seem ok at 14-16c on core, and 33-35c at socket. after about 10 minutes running P95 the temps are 52 c core and 75 c socket..
I have lots of airflow in my chassis. 1-160mm intake side mount, 1-140mm intake front, 1-90mm intake front, 140mm exhaust top rear, 1 90 exhaust top right above my heat sink adding a push/pull configuration kinda... heat sink is an 212 evo single 120m push fan. should my temps be getting that high on socket? any ideas or suggestions?
summary of components
1-160mm in
1-140mm in
1-90mm in
1-140mm out
1-90mm out
heat sink coolmaster hyper212 evo 1-120mm push config
gtx 950 sc+ 2x90mm
evga 600b psu
Asrock 970A G/3.1
hyperx fury 8gb (1-8gb 1600mhz)
AMD FX 8350
Custom chassis
I have lots of airflow in my chassis. 1-160mm intake side mount, 1-140mm intake front, 1-90mm intake front, 140mm exhaust top rear, 1 90 exhaust top right above my heat sink adding a push/pull configuration kinda... heat sink is an 212 evo single 120m push fan. should my temps be getting that high on socket? any ideas or suggestions?
summary of components
1-160mm in
1-140mm in
1-90mm in
1-140mm out
1-90mm out
heat sink coolmaster hyper212 evo 1-120mm push config
gtx 950 sc+ 2x90mm
evga 600b psu
Asrock 970A G/3.1
hyperx fury 8gb (1-8gb 1600mhz)
AMD FX 8350
Custom chassis
Facebook
Twitter
Instagram