Restarts after changing CPU to 3.0 p4 from 2.8 ghz

http://speccy.piriform.com/results/xqDe08dUJdbXXJb2DAV5iUp

you can see information about my pc.

2 days ago on may 6, I found a 3.0 ghz so i put instead of 2.8 ghz.

At first, it couldnot load windows 7. After seeing windows screen, it was restarting with bsod. So, i changed rams (i have 2x1 gb kingston , 2x1 other brands and 1 adata 512 mb and 4 slots in motherboard) in slots. Firstly, i tried all dual combinations with 2 rams in dual condition but it always restarted (i put always same slots in motherboard).

Then i tried some combinations with 3 rams. This time, i could see desktop but after some times, it was restarting.

BEfore upgrading CPU, with 2.8 ghz and with 2 x 1 gb kingston rams, there were no restarts. Rarely bsods. But now it restarts always.

I am adding my dump files as .zip t. I tried to install after may 6. Before may 6, i was trying to figure out which rams are good so i was trying combinations.

Also i saw "new driver installed for 3.0 ghz" in system tray. I dont know if this restarts are about CPU or are about new software.

For example now i am on same pc but in xp home edition, with 2 rams but no restarts. Or with 2 rams while it was restarting, i could go into xp again. Maybe xp doesnot force so much rams as windows 7 does, i dont know

I cant see so much difference between 3.0 and 2.8 so i can go back to 2.8. BUt i want to know if rams are motherboard have errrors.




http://www.gigabyte.com/products/product-page.aspx?pid=1863#bios

my mobo is rev 4.0 but while booting, bios shows f5. I updated to last bios last year from floppy. But why does my speccy show f2?


so xp shows f2
http://speccy.piriform.com/results/YNl2KvAL28IotCBA4pUwBRo

and this is strange. i wanted to test my cpu with stress following this

http://www.sevenforums.com/tutorials/220743-cpu-stress-test-using-intelburntest.html

but when i run hwinfo after installing, it restarted as soon as i click run. i treid 2times and restarted. I couldnot edit previous post to add this, because of that restart.

So maybe cpu is faulty?

edit: this restart made me record that screen shot. it shows f5 there

my cpu is:

pntium4
3.00 ghz 1 m 800
sl79l costa rica
3410a042
3310a366
1136

SO it is sl79l

http://www.gigabyte.com/webpage/20/HowToReflashBIOS.html

i did not bios update like that. i put file into floppy and from bios menu i updated. Maybe i need also update while inside windows? bcause speecy doesnot show.


http://speccy.piriform.com/results/onNSOiuuD78WlUHWrWKywiy
i put again 2.8 ghz but still shows f2 bios





I cant upload my dumb file but you can download from here if you want

http://www.techsupportforum.com/forums/attachment.php?attachmentid=280962&d=1462733738