Hi everyone!
I start building a PC with the following components:
intel i5-6500
gigabyte b150-hd3p mobo
corsair cx430 psu
ddr4 ballistix 8gb ram 1x
Now everything was working, I installed windows 10 and did the windows updates with many restarts. After that I installed all driver updates and when I restarted the pc for the updates to take effect, but the pc wouldn't boot anymore. It just turns on, no beeps, no connection to the monitor, just stays on. When I turn it off by holding the power button, a few seconds later it turns itself on again, doing the same thing. I went by the whole checklist, checked every input. I even reset the bios at the mobo and after that by removing the mobo battery for half an hour. Lights are working, so are the fans, but no beeps or boot.
Please help, I really don't know where to go from here.
I start building a PC with the following components:
intel i5-6500
gigabyte b150-hd3p mobo
corsair cx430 psu
ddr4 ballistix 8gb ram 1x
Now everything was working, I installed windows 10 and did the windows updates with many restarts. After that I installed all driver updates and when I restarted the pc for the updates to take effect, but the pc wouldn't boot anymore. It just turns on, no beeps, no connection to the monitor, just stays on. When I turn it off by holding the power button, a few seconds later it turns itself on again, doing the same thing. I went by the whole checklist, checked every input. I even reset the bios at the mobo and after that by removing the mobo battery for half an hour. Lights are working, so are the fans, but no beeps or boot.
Please help, I really don't know where to go from here.