I have an extra motherboard with bent pins. So i try to unbent them. To test if it works. I Inserted my cpu i5-3470 then no boot. Then i remove again the cpu then one motherboard pin is sticked to the gold contact. I try to remove the pin then the gold is also removed. I tested the cpu on my other motherboard and the idle temps are getting 90-100c shown in bios. While on desktop 10 secs it will auto shutdown. Are there any repairs? My other cpu idle is 35 that means cooler is good.
sorry for my bad english
Here is the pic
https://scontent.fmnl4-6.fna.fbcdn.net/v/l/t34.0-12/13187835_1584979608498103_1799137911_n.jpg?oh=dcc4095297ab8a3909db2cc554ed27e2&oe=573F75AE
sorry for my bad english
Here is the pic
https://scontent.fmnl4-6.fna.fbcdn.net/v/l/t34.0-12/13187835_1584979608498103_1799137911_n.jpg?oh=dcc4095297ab8a3909db2cc554ed27e2&oe=573F75AE
Facebook
Twitter
Instagram