How much wattages do I get from this power supply?

Solution


youll have to spin that cable round,its the wrong angle to tell.
irregardless with both a 380 & the 970 (power requirements are pretty much identical on both) you 100% need the cable configuration I put in the picture above as a minimum - meaning 1x 6 pin & 1 x 6+2 pin powr connectors.

None of us have any idea whatsoever what kind of quality that unit is - the 12v rail specs on the label make it seem as if it would power just about any setup but in all honesty ( not meaning to sound at all rascist) when I see a made in china badge & no real sign of actual manufacturer branding it really does not fill me with confidence

[strike]looks like it is a 300W power supply. the best you could safely run on three is a GT 740. a 750ti could be a stretch. for those cards you mention you would want a decent 550 watt power supply by EVGA, XFX, Seasonic, Super Flower, or Corsair (but not the VS or CX/CXM series) and at least 80 PLUS BRONZE. the 970 could get by on a decent 500W.
[/strike]
300 per rail... never mind. looks like it could be an alienware OEM PSU or something. if that is the case it is 100% fine, if it is some cheap brand then no.
 

Ryan_78

Honorable
Uhh it's an old design PSU and shouldn't be used I guess, can't be sure though. 3 12v rails provide the needed 936 watts.... And I guess it's a 1200w PSU.....

But what is more important is its brand and quality and model. You want a high quality PSU to safely provide clean power to the card.

So what brand/model is it?
 

Eximo

Titan
Ambassador
I think the logo might be HI-TECH, can't really tell. Google is being overrun with power supplies that have a similar model name.

Not a 1200W supply if they only rated the total output at 900W, that means it can dissipate its heat while delivering 900W output at some rated ambient temperature.
 

Eximo

Titan
Ambassador
It is quite a bit more capacity then you need. I would just give it a try.

Even if they weren't 100% truthful with the specs and the 900W rating is at 20C or something silly, it is probably a decent 600-700W continuous output supply which is still enough.
 


I don't know, the fact that there is nothing on it worries me. Also if they lied on one thing who is to say the power coming out is stable or even clean? I am still looking for more info, but it seems there is none. this thing should work, but it is a crapshoot.
 

Warthis

Reputable
Jun 9, 2014
41
0
4,530
The PSU is running the PC that I am on at the moment, I bought the PC like I don't know maybe a year ago or more
I checked on command prompt when the windows was installed and it pointed out 16/1/2015. so I don't know when I
exactly bought it, I think it would be around 1 year or something.

my PC build has i5 4690 and a 1TB storage, 8GB of RAM and a H91M Plus or something as motherboard and this PSU as graphics card I use the integrated graphics card that comes with the CPU Intel Graphics 4600.
 
If you bought the computer as a pre-built, then most likely, the company used a very low quality PSU to improve their profit margin.

I don't think a day goes by here on Tom's that we don't see a low quality PSU fail and we are left trying to figure out whether it killed the motherboard, CPU, GPU, all of the above, none of the above, etc.

The low quality models use thin gauge wiring, poor Chinese-made capacitors and don't have good fault protection circuits (to prevent damage to computer components when it dies).
 

Warthis

Reputable
Jun 9, 2014
41
0
4,530
I assume someone built it I mean like it's not for some company I think so what do you think and what do you mean by "4x 8 pin pci-express power connectors" is that good or bad?
 
King yes international would be a 100% outright no from me personally.

Check you PSU cables , this is a pci-express connector

pcie6-2-jpg.57637


A PSU with 12v rails of that size should have 2 pairs of those- I would be doubtful if it even has any 8 pin (6+2) connectors at all.
 
I think what Madmatt is saying (he can correct me if I am wrong), is that if your PSU is a good quality unit, it will have two 8 (6+2) connectors and two 6 pin connectors.

I believe the R9 380x requires two 6 pin connectors for power. Not sure about the GTX 970, I couldn't find any pictures showing the power connectors on that one. Probably someone here owns a 970 and can say for sure.

Edit: And yes, your photo is showing a 8 pin (6+2) connector.
 


youll have to spin that cable round,its the wrong angle to tell.
irregardless with both a 380 & the 970 (power requirements are pretty much identical on both) you 100% need the cable configuration I put in the picture above as a minimum - meaning 1x 6 pin & 1 x 6+2 pin powr connectors.

None of us have any idea whatsoever what kind of quality that unit is - the 12v rail specs on the label make it seem as if it would power just about any setup but in all honesty ( not meaning to sound at all rascist) when I see a made in china badge & no real sign of actual manufacturer branding it really does not fill me with confidence

 
Solution