ASrock extreme 7+ zalman9500A cooler

Andrew_133 · May 20, 2016

I messed <<edited by moderator>> up when purchasing and pcpartpicker said it was compatible, so I ordered it. It doesn't fit, so any new cooler possible?

COLGeek · May 20, 2016

That heatsink is compatible with a socket 1150 mobo, so it should be compatible with a socket 1151 mobo.

What is the exact model number of your Zalman?

Andrew_133 · May 20, 2016

Its the S9500A LED, even if its compatible I can't seem to understand the manual. It says you can install it horizontal way or vertical way.

COLGeek · May 20, 2016

Do you have the manual found here?

http://www.zalman.com/eng/product/Product_Read.php?Idx=277

The vertical/horizontal orientation means mounting clip support so that the fan will point towards the back or top of your case. See the 2 small tabs on clip support? Use those to position the way you want the fan to blow. Most users have the fan blow air towards the back case fan so it gets exhausted from your system more efficiently.

Good luck!

Andrew_133 · May 20, 2016

COLGeek :

I see that you are ASRock specialist or so it says. My question for you is where do I plug in the cooler's fan adapter thing. Its 3ping and all the plugs on the mobo are 4 pin. Thanks in advance

COLGeek · May 21, 2016

That is just a badge earned for answering questions regarding Asrock products.

The speed controller? Yes, you can use it to control the fan speed/noise levels. Also, you do plug into the 4-pin power header on the mobo. You should be able to plug the fan into one side of the tabbed power header.

Search

ASrock extreme 7+ zalman9500A cooler

Andrew_133

Commendable

COLGeek

COLGeek

Cybernaut

Andrew_133

Commendable

COLGeek

Cybernaut

Andrew_133

Commendable

COLGeek

Cybernaut

TRENDING THREADS

Latest posts

Moderators online

Share this page