PLEASE HELP Biostar B85MG and the Intel g3258

macklin345

Commendable
May 25, 2016
3
0
1,510
Hi, I built a custom pc with the biostar B85MG and the Intel g3258.
I know I need the lowest bios from 2013 to overclock but I can't seem to figure out how to change the voltage.
My bios has these settings
Fivr OVP/OCP Enabled
Firv Efficiency Enabled

CPU VOLTAGE MODE OVERRIDE
CPU OVERRIDE VOLTAGE TARGET MV AUTO

RING VOLTAGE MODE
RING OVERRIDE VOLTAGE TARGET MV AUTO

SA VOLTAGE OFFSET MV 0
IOA VOLTAGE OFFSET MV 0
IOD VOLTAGE OFFSET MV 0

DRAM VOLTAGE AUTO
CPU Vcc AUTO

I can't for the life of me figure out where to adjust for overclock, except for the MHz which I changed in CPU RATIO.
ANY HELP GUYS? IT SEEMS NO ONE HAS THIS BOARD BECAUSE I LOOKED AND CAN FIND ANYTHING BUT TO USE THE OLDEST FIRMWARE.
THANKS
Photos of my bios settings


image free hosting


photo hosting


http://s33.postimg.org/os5k7fqi7/20160525_215353.jpg

http://s33.postimg.org/oz6lfjai7/20160525_213701.jpg
 

macklin345

Commendable
May 25, 2016
3
0
1,510
This forum has the most useless users. I was a simple guy trying to find some simple solution. No forum has any answer nor does any site for this less used motherboard. But I found out how to overclock it myself by destroying a motherboard and finally getting the overclock to take and work. I am closing my account and hope the next user finds a site that will be of some use.
Thanks for not replying, and to the single guy who did thank you from the bottom of my heart and even tho your answer is wrong you at least tried. Thank you sir