- May 26, 2016
- 3
- 0
- 1,510
Hey guys,
I am having a real prpblem with first boot of newly built system. Specs are as follows:
Mobo: MSI X99S Sli plus
Cpu: intel i7 5820k @3.3
Hdd: seagate constellation e.s3 2tb
Ssd: samsung 850 pro 256gb
HSF: fortis 3
RAM: 2x16gb vengeace lpx 2666 MHz cmk32gx4m2a2666c16
Gpu for testing: gts 450 palit
Case: enthoo primo gold
Psu: corsair hx850i
So after initial assemble everything turns on - fans, gpu, hdd, drive - but monitor shows "no signal". I know that it is most frequent problem with first builds etc. Furthermore nothing beeps ( yes I've connected speaker to mobo ). I've double checked all connections to psu - 24 pin and 8 pin are both connected, pwm hub is connected to cpu_fan and fan from hsf is connectod to 1 slot in hub - this hub comes with phanteks case ( I didnt connected the +12 from psu because i've read that it isn't required ). After 2 more dismantling and assembling nothing changed. Cpu is connected in a right way - triangles are matched and no pins are bent. I have followed every step in guide found on this site and nothing wrong poped up. Now i have take out mobo with hsf, gpu, hdd, psu and ram , and connected them on table without case. After following the extended guide that I've saw somewhere on this forum i've started testing components. Without ram and gpu there are 3 long beeps and fan is spinning but nothing else happens. After inserting 1 stick to DIMM 1 there are no beeps - as far as i know there should be beep caused by missing gpu. I have concluded that problem can be with mobo or with ram sticks. Is it possible that my mobo isn't compatibile with my rams? At the shop site there were info that it is compatibile if I remember correctly but I cant find this model at MSI Compatibility list. I've already spent 12h fighting this pc and I would really appreciate any help that you guys can provide. And thanks in advance for any replies
I am having a real prpblem with first boot of newly built system. Specs are as follows:
Mobo: MSI X99S Sli plus
Cpu: intel i7 5820k @3.3
Hdd: seagate constellation e.s3 2tb
Ssd: samsung 850 pro 256gb
HSF: fortis 3
RAM: 2x16gb vengeace lpx 2666 MHz cmk32gx4m2a2666c16
Gpu for testing: gts 450 palit
Case: enthoo primo gold
Psu: corsair hx850i
So after initial assemble everything turns on - fans, gpu, hdd, drive - but monitor shows "no signal". I know that it is most frequent problem with first builds etc. Furthermore nothing beeps ( yes I've connected speaker to mobo ). I've double checked all connections to psu - 24 pin and 8 pin are both connected, pwm hub is connected to cpu_fan and fan from hsf is connectod to 1 slot in hub - this hub comes with phanteks case ( I didnt connected the +12 from psu because i've read that it isn't required ). After 2 more dismantling and assembling nothing changed. Cpu is connected in a right way - triangles are matched and no pins are bent. I have followed every step in guide found on this site and nothing wrong poped up. Now i have take out mobo with hsf, gpu, hdd, psu and ram , and connected them on table without case. After following the extended guide that I've saw somewhere on this forum i've started testing components. Without ram and gpu there are 3 long beeps and fan is spinning but nothing else happens. After inserting 1 stick to DIMM 1 there are no beeps - as far as i know there should be beep caused by missing gpu. I have concluded that problem can be with mobo or with ram sticks. Is it possible that my mobo isn't compatibile with my rams? At the shop site there were info that it is compatibile if I remember correctly but I cant find this model at MSI Compatibility list. I've already spent 12h fighting this pc and I would really appreciate any help that you guys can provide. And thanks in advance for any replies
Facebook
Twitter
Instagram