A88X-Pro + A10 7890K + Win10 - Triple/Dual Monitor Issue

t30485 · May 26, 2016

I've tried to have a search on the boards and can't seem to find anyone with the exact issue I'm having. Bios has been updated and multi monitor enabled. CC will only find one monitor. It's like only one port can output at a time, I plug in monitors to the HDMI, DVI and Display Port, if I remove the HDMI the DVI outputs, however if I remove the DVI the DP does not work.

This board is new so all signs point to a fault or something simple I might be missing? Any help would be great.

Thanks in advance.

Tim.

Lutfij · Jul 9, 2016

1| Can you please pass on your full system's specs inclusive of your OS?
2| Have you double chekced to see you're on the latest BIOS? I'd suggest you download the drivers found off of AMD.

I've assumed you're on Windows 7, thus this link:
http://support.amd.com/en-us/download/apu?os=Windows%207%20-%2064

t30485 · Jul 9, 2016

Lutfij :

Specs are below;

OS: Win10 64bit
PSU: Thermaltake TR2 Challenger 700W
CPU: AMD A10-7890K
RAM: Corsair Vengence Pro 16GB (2x8GB)
SSD: Corsair M500 240GB
Monitors: Samsung S24D300 x2 + 2243BW

Bios and chipset/graphics drivers already updated and no change. I can't think of any logical reason, I'm baffled :/

Lutfij · Jul 9, 2016

You went through this guide while reinstalling your GPU drivers, right? You've also made sure you've disabled automatic device driver updates?

You also might've meant the Crucial M500 SSD.

t30485 · Jul 9, 2016

I thought it maybe that, so I even did a fresh Windows install and still the same :/.
Sorry my bad, I did mean Crucial.
For the time being I've used my old HD6950 2GB in at the minute, all outputs working perfectly on that without an issue

Lutfij · Jul 9, 2016

Then the issue should be notified to your seller and/or Asus. I own an A10-6800K + ASRock A85x-itx and all outputs work flawlessly. Out of the box though the APU's are capable of outputting an eyefinity setup provided the drivers are installed.

t30485 · Jul 9, 2016

I've tried Asus live chat they only suggested driver updates and then to return to retailer. I've replaced the board once already (Amazon bought) and still the same issue so could it be a bad batch or I'm missing something really simple :/

Lutfij · Jul 9, 2016

You could try and install Windows 7 on your system for a sort of run down experiment to rule out that the OS is not playing tricks on you. You could return it and pick another maker's board this time around. If I was in your place and have tried everything then the culprit would be with your boards native outputs(provided there aren't any options to disable and enable outputs from within BIOS).

t30485 · Jul 9, 2016

There is an option for multi monitor outputs but I enabled that first before any driver updates so this is madness, I think I may need to consider another board although this was the better out the four compared really.

Search

A88X-Pro + A10 7890K + Win10 - Triple/Dual Monitor Issue

t30485

Commendable

Lutfij

Titan

t30485

Commendable

Lutfij

Titan

t30485

Commendable

Lutfij

Titan

t30485

Commendable

Lutfij

Titan

t30485

Commendable

TRENDING THREADS

Latest posts

Moderators online

Share this page