Forgot to put gpu and cpu power cables and now pc wont boot

EnderBorn

Reputable
Nov 16, 2015
63
0
4,640
So i was fixing my pc that wouldnt boot and i tried a lot of things. I tried disconnecting literally everything and putting it back but i forgot to plug cpu and gpu power cables. I tried to boot but it wouldnt and after 30 secs i realised that i didnt plug cpu cable. I tried to boot again and after another 30 secs i realised i forgot to plug gpu cable too. After i plugged everything i tried to boot again but all i saw on my screen is "no signal"

Cpu: intel e4300
Gpu: geforce 8600 gts
Ram: 2 x 1gb ddr2
Mobo: GA-N650SLI-DS4
Psu: modecom 530 (530 watts)

I tried to clear cmos and disconnect everything except cpu and ram but nothing helped.

Everytime i boot my pc i hear how disk drive make a sound when it checks for a disk and after a time it happens again and i think when i try to boot after a few seconds it restarts once.

This means i fried my cpu/gpu/mobo?
 
Solution
I know the problem bro. Happenned me like 5 minutes ago XD. Just plug your DVI/VGA/HDMI on your gpu and not on your motherboard. And it will be 100% guarrentied fixed

If it doesnt work sorry. It will probably help if you chane pci-e slot of your gpu or unplug your gpu

EnderBorn

Reputable
Nov 16, 2015
63
0
4,640

nothing changed.. but thanks for replying..
 

En3cee

Distinguished
Jul 29, 2016
3
0
18,520
I know the problem bro. Happenned me like 5 minutes ago XD. Just plug your DVI/VGA/HDMI on your gpu and not on your motherboard. And it will be 100% guarrentied fixed

If it doesnt work sorry. It will probably help if you chane pci-e slot of your gpu or unplug your gpu
 
Solution