i just put together a new computer and i haven't been able to connect to the internet even though everything is plugged in. it keeps saying i don't have the right drivers installed and i cant seem to find the right one to put on a usb. im pretty sure the motherboard is a acer aspire m3400 but not too positive cause i cant find a driver when i search for it that can be put on my usb. im very lost anything will help at this point
i cant find the right ethernet controller drivers for my new computer. im so lost
- Thread starter twilburn
- Start date
Solution
- Sep 7, 2013
- 25,977
- 860
- 120,140
"im pretty sure the motherboard is a acer aspire m3400"
That's a desktop PC model, not a motherboard model.
Did you buy the PC ready-built or did you build it yourself?
That's a desktop PC model, not a motherboard model.
Did you buy the PC ready-built or did you build it yourself?
- Sep 7, 2013
- 25,977
- 860
- 120,140
Did your brother build it or was it factory-built?
Is there a brand name on the front of the PC case?
Please do not mark a post as the "Best Solution" unless it has fixed your problem
Is there a brand name on the front of the PC case?
Please do not mark a post as the "Best Solution" unless it has fixed your problem
- Sep 7, 2013
- 25,977
- 860
- 120,140
Go here: http://www.acer.com/ac/en/GB/content/drivers
Where it says "Search by Product Model", enter Aspire M3400, then click the green Aspire M3400 underneath what you just typed.
The drivers should appear lower down the page.
Then just select Windows 7 32-bit, or Windows 7 64-bit depending on which version your PC has.
Note: Only Windows 7 is supported on the Aspire M3400.
Good luck.
Where it says "Search by Product Model", enter Aspire M3400, then click the green Aspire M3400 underneath what you just typed.
The drivers should appear lower down the page.
Then just select Windows 7 32-bit, or Windows 7 64-bit depending on which version your PC has.
Note: Only Windows 7 is supported on the Aspire M3400.
Good luck.
- Sep 7, 2013
- 25,977
- 860
- 120,140
Yes, you can put the drivers on a pen drive using a different PC if the Acer can't connect to the net yet.
Then plug the pen drive in to the Acer.
Then plug the pen drive in to the Acer.
- Sep 7, 2013
- 25,977
- 860
- 120,140
Yes, that much is obvious.
The on-board graphics adapter is not powerful enough to play that game.
You will have to install a gaming GPU (AMD or GeForce) in a PCI Express slot.
You will probably have to install a more powerful PSU as well.
TRENDING THREADS
-
-
-
Question should i put the new 3050 lp in a sff hp g3?- Started by jordanbuilds1
- Replies: 14
-
Question Case has 2x front USB 3.0 plugs but the board only has one USB 3.0 connector.
- Started by knowledge2121
- Replies: 5
-
Question What Cat6 Ethernet Cable Should I Get? I'm From The UK
- Started by legendairyjoe
- Replies: 3
-
-
Facebook
Twitter
Instagram