G3258 Overclocking. Trying to make sure my 4.4Ghz is working right.

Lostpower

Reputable
Jun 1, 2016
19
0
4,510
Yeah I got it very stable i believe.
Ran lots of test. over 5
no Crashing.

on bios and Speccy says 35-55 temp

Speccy says 35-48 idle 66 max temp on load
Bios usually says 48-53 and says 3.9Ghz but shows its set to 4.4Ghz

Cpu Z shows 4.4Ghz but cycles 4.4/3.7Ghz. Extremely rare to go under 3.7Ghz
I wanted 4.0/4.4ghz cycle.
But is it ok to be 3.7/4.4Ghz on CPU Z

I do get the nice 7.3 Windows experience score.
 


I depends on your overclocking intentions some want to leave the CPU throttling back the clock when it idles, some want the CPU to run the full 4.4ghz clock both cores all the time.

So what do you want?

If you want the first part of the sentence I wrote you, you are just fine.

If you want the 2nd part of the sentence, you're not even close.

 

Lostpower

Reputable
Jun 1, 2016
19
0
4,510
Mine randomly goes 4.4ghz-3.7 on idle or load.
I want it full time 4.0-4.4
but 3.7Ghz Idle to turbo 4.4 Is fine if it sorta stays at 4.4. it constantly jumps during load as well.

Any ideas. Is some kind of feature on that makes it jump low up and down.

I know it's working because 3.7ghz would make under 7.2 cpu score.
I am getting 7.3

And says Temps are fine.

When I oc amds like my A10 7870k
I got it constant 4.3ghz and would turbo itself to 4.6ghz on use.

So that's why don't understand what Intel is doing.
 

Lostpower

Reputable
Jun 1, 2016
19
0
4,510
anyone? My question is pretty straight forward. If someone knows how to help.

Damn i hate intels. You folks not supportive :p kiddin

If was Amd i'd probably have a 100000x answers haha.
 

Lostpower

Reputable
Jun 1, 2016
19
0
4,510
Well i sold the system but on different build. When i put it to 4.1Ghz it stayed at 4.1Ghz and wouldn't move.

i have another one ready to build later.

so still no solution why at 4.4ghz it jumps around.