BadActor Expert Ambassador Oct 31, 2015 8,749 1 54,965 Jun 2, 2016 #2 Measure from the top of the CPU to the side panel. Gigabyte doesn't list the specs for CPU cooler clearance, but you will need 160 mm. Upvote 0 Downvote
Measure from the top of the CPU to the side panel. Gigabyte doesn't list the specs for CPU cooler clearance, but you will need 160 mm.
BadActor Expert Ambassador Oct 31, 2015 8,749 1 54,965 Jun 2, 2016 Solution #4 Should fit then, the cooler is 159 mm. Upvote 0 Downvote Solution
Tradesman1 Legenda in Aeternum Jun 5, 2013 67,883 40 126,960 Jun 2, 2016 #5 Specs show it as 185 mm wide http://www.gigabyte.com/products/product-page.aspx?pid=4201#sp which equates to about 7.25" need around 7.5 inches wide for the 212 EVO after allowing for standoffs, mobo and mounting. Might look at the Cryorig H7 which is just as good and not as tall Upvote 0 Downvote
Specs show it as 185 mm wide http://www.gigabyte.com/products/product-page.aspx?pid=4201#sp which equates to about 7.25" need around 7.5 inches wide for the 212 EVO after allowing for standoffs, mobo and mounting. Might look at the Cryorig H7 which is just as good and not as tall
V Vincent_22 Distinguished May 29, 2016 76 0 18,640 Jun 3, 2016 #6 Hyper evo 212 did fit with no problems at all Upvote 0 Downvote
V Vincent_22 Distinguished May 29, 2016 76 0 18,640 Jun 4, 2016 #8 Maximum 47 Degrees with FX6300 is it good ? Upvote 0 Downvote
BadActor Expert Ambassador Oct 31, 2015 8,749 1 54,965 Jun 4, 2016 #9 That's very good for an air CPU cooler. Upvote 0 Downvote