I have a quadcopter flight board that uses an STM32 processor. The Dfuse stm3280 zip is downloaded and then the driver from this is installed. You are then asked (by the boards designer) to replace this driver with a WinUSB driver by using Zadig. So I so this and get confirmation from Zadig that this has been successful but when I go to connect the flight boar, via USB to the software interface to set it up, it shows as unknown device in Windows 7 Device Manager indicating to me that there is no driver installed. Is there any other way that I can force this board and its STM32to use this WinUSB driver that is required to allow it to connect properly Here is a link to the instructions for this driver changing for this flight board. Thanks for any help or suggestions
STM32 driver problem
- Thread starter Pedro147
- Start date
- Sep 7, 2013
- 25,983
- 865
- 120,140
"Here is a link to the instructions for this driver changing for this flight board".
You must have pasted the link with invisible ink - LOL
You must have pasted the link with invisible ink - LOL
TRENDING THREADS
-
Question PC won't turn on after unplugging it, what could be wrong?
- Started by donnieberry
- Replies: 15
-
-
Question Cant boot into windows, black screen with static
- Started by Christer souza
- Replies: 7
Facebook
Twitter
Instagram