Hey guys really hope someone could help me here,
just assembled a pc few days ago , my config is as follows,
Asus Rampage V extreme OC Bundle
intel i7 5820k CPU
G.SKILL Ripjaws 4x16GB DDR4 3000 Mhz (64 GB) RAM
zotec nvidia gtx 970x 4GB GPU
Corsair hydro series H110i GTX liquid cooler
Corsair AX1500i PSU
1x SSD(120GB OS) 2x HDD (1TB+120GB)
Corsair graphite series 760T cabinet
3x benq monitor nvidia surround(1x DiplayPort to HDMI, 1x HDMI to HDMI , 1x DVI to HDMI )
1st when i assembled it i had this same issue it showed q-code error 00 the i took the them all out of the cabinet and tried assembling it noticed the wiring was not correct, fixed that issue assembled it back and it worked perfectly, installed os and tons of games, played for around 2 days and all of a sudden when i tried to boot my pc its says q-code error 00
guys i tried with 1stick of ram, tried both back and red ports,
tried clearing CMOS
Tried rewiring them
tried changing the GPU port PCIx16 and PCIx 8
tried changing bios from BIOS1 TO BIOS2
still the same error code... please help !
just assembled a pc few days ago , my config is as follows,
Asus Rampage V extreme OC Bundle
intel i7 5820k CPU
G.SKILL Ripjaws 4x16GB DDR4 3000 Mhz (64 GB) RAM
zotec nvidia gtx 970x 4GB GPU
Corsair hydro series H110i GTX liquid cooler
Corsair AX1500i PSU
1x SSD(120GB OS) 2x HDD (1TB+120GB)
Corsair graphite series 760T cabinet
3x benq monitor nvidia surround(1x DiplayPort to HDMI, 1x HDMI to HDMI , 1x DVI to HDMI )
1st when i assembled it i had this same issue it showed q-code error 00 the i took the them all out of the cabinet and tried assembling it noticed the wiring was not correct, fixed that issue assembled it back and it worked perfectly, installed os and tons of games, played for around 2 days and all of a sudden when i tried to boot my pc its says q-code error 00
guys i tried with 1stick of ram, tried both back and red ports,
tried clearing CMOS
Tried rewiring them
tried changing the GPU port PCIx16 and PCIx 8
tried changing bios from BIOS1 TO BIOS2
still the same error code... please help !