Graphic Card fan spinning but no display
- Thread starter Ajinkya32
- Start date
- Sep 7, 2013
- 25,977
- 860
- 120,140
May be the GPU (PCI Express) needs to be selected in the BIOS instead of the default on-board GPU?
Remove the 9500, reconnect monitor to on-board GPU, then go in to BIOS Setup and check.
Remove the 9500, reconnect monitor to on-board GPU, then go in to BIOS Setup and check.
i had already done every thing in bios of my zotac motherboard in which gpu is not working. but still nothing is happening. as i already mentioned, i had already tested the gpu with my another pc. it has zebronics motherboard and the bios is almost similar on both the motherboard. i had selected PEG/IGD on both motherboard. But, the gpu only works on Zebronics motherboard not on Zotac though the options are same. I had cleand the PEG slot of Zotac but still no display. i also tried exchanging the PSU, still the gpu only works on zebronics not on zotac. Please any Solution?
- Sep 7, 2013
- 25,977
- 860
- 120,140
i found the solution. there was some jumpers on the board near the pci-e slot which allows the board to either use onboard dvi slot or the pci-e slot. i had just arranged the jumpers for pci-e as mentioned on the motherboard itself and the slot started working. Thanks Phillip Corcoran for your quick help.
TRENDING THREADS
-
-
-
-
Question Display no signal when 1440P or higher full screen gaming- Started by Wouter_U
- Replies: 3
-
Question Download speed is slow on only my PC - please help!- Started by Ograsmium
- Replies: 15
Latest posts
-
-
Question Buying a used card, what should I look for before purchase?
- Latest: ohio_buckeye
-
-
-
-
Facebook
Twitter
Instagram