Just installed an extra set of 2x8 GB RAM (Kingston HyperX Fury), but now my screen doesn't show anything?

Toggle sidebar Toggle sidebar
T

Twacz

Commendable
Apr 13, 2016
8
0
1,510
So today i got some new ram, Kingston HyperX Fury 1866Mhz 2x8 GB - i already had 2x8 of the same ram in my pc, i was just deciding to upgrade my ram.

They are confirmed compatible, and i have win 7 64-bit so everything should be okay there.

But when i managed to put them in and turned my pc on, nothing showed up on the screen? - It was just blank but my pc was running... So any ideas on what the issues may be? I've already checked to see if the where placed properly. My MB does support 32 Gb of ram, but for some reason, i can't manage to find out what is going on!
AND YES, they work with just 2 ram sticks in slot 1 and 3...

Please help me :)
 
Sort by date Sort by votes
smorizio

smorizio

Titan
Jan 22, 2010
30,984
9
125,315
does the pc work with three ram sticks installed?? have you tried updating the mb bios to see if it a bios bug?? have you email mb tech support see if those 4 ram sticks are ok to run with all slots filled. in the dram settings have you tried bumping the ram voltage up?? on the new sticks are they the same voltage a lot of the newer ddr3 ram went low voltage. 1.35v.
 
Upvote 0 Downvote
Hlsgsz

Hlsgsz

Champion
Feb 29, 2016
8,003
5
51,415
Switch the kits around. Also, blow some air in the slots that weren't used as there may be some dust buildup. You can also power it on wiht two sticks and disable XMP in bios or just reset the CMOS as it will result in XMP being turned off.
 
Upvote 0 Downvote
T

Twacz

Commendable
Apr 13, 2016
8
0
1,510


Couldn't agree more, sometimes the truth is just right in front of you :) Then it's good to have a "veteran" such as you..!

You have almost been on this site since i got my first phone ´, damn
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom