Hi all,
I got an i7-6700k as well as all new parts for a new PC.
I am using the H115i cooler.
I have had issues with heat ever since I built this PC. On prime95, I was getting temps of 75C relatively quick and rising. This is with stock clocks, 75F room temp, and a good air-flow case (H440). Gaming, temps are going around 65-70C after a while, but start around 50C
I am on my 2nd H115i since I thought I had a faulty cooler.
Also I have tried reseating and reapplying thermal paste on the 1st cooler a few times with same results. The thermal paste was spread out thin and evenly.
At this point I can't even overclock because temps will be too high. And with this cooler, my temps should be much lower.
Could the CPU be reading too high temps? The cooler does not feel to be as hot as the CPU reads.
Any thoughts? TIA
PS. Package temp is higher than core temps ALWAYS.
I got an i7-6700k as well as all new parts for a new PC.
I am using the H115i cooler.
I have had issues with heat ever since I built this PC. On prime95, I was getting temps of 75C relatively quick and rising. This is with stock clocks, 75F room temp, and a good air-flow case (H440). Gaming, temps are going around 65-70C after a while, but start around 50C
I am on my 2nd H115i since I thought I had a faulty cooler.
Also I have tried reseating and reapplying thermal paste on the 1st cooler a few times with same results. The thermal paste was spread out thin and evenly.
At this point I can't even overclock because temps will be too high. And with this cooler, my temps should be much lower.
Could the CPU be reading too high temps? The cooler does not feel to be as hot as the CPU reads.
Any thoughts? TIA
PS. Package temp is higher than core temps ALWAYS.