- Jan 27, 2015
- 109
- 0
- 4,710
So I just replaced a dead motherboard in my system, and hooking it up my rear fan was stuck at 100%. It was plugged into the 'aux 1' fan slot which was a PWM slot, so I then plugged it into a three-pin fan header and it was still stuck at 100%. I also tried using my PWM fan splitter cable and it was STILL stuck at full speed. I am just curious on how I can setup a custom fan curve like my old motherboard did. I had it respond to the cpu usage/temp.
I'd be happy to respond to any questions pronto, so ask 'em
I'd be happy to respond to any questions pronto, so ask 'em
Facebook
Twitter
Instagram