Hello, I wasn't sure if I should post it here or another forum.
Anyway, I just upgraded my PSU to new SeaSonic X-560 Gold Full modular PSU., and after the upgrade I've started to experience weird issues. I can't start up the pc anymore with my power button, but only when I disconnect the power cable from the PSU and re-plug it, then the pc starts on by itself.
Edit:
I've been inspecting thoroughly the whole computer.
wtf going on?
Do you have any ideas why this is happening to me?
Anyway, I just upgraded my PSU to new SeaSonic X-560 Gold Full modular PSU., and after the upgrade I've started to experience weird issues. I can't start up the pc anymore with my power button, but only when I disconnect the power cable from the PSU and re-plug it, then the pc starts on by itself.
Edit:
I've been inspecting thoroughly the whole computer.
■ When i switch back to my old PSU everything back to work normal.
■ Iv'e checked up all the cables, all are secured
■ The power cable that connected to the button is good and no defections found.
■ Seems like when i hit the button and set the computer to ON then I need just unplug the cable and put back, and viola, it works.
■ But when the power button on OFF, The re-plugging not working.
wtf going on?
Do you have any ideas why this is happening to me?
Facebook
Twitter
Instagram