Robin_40 :
I'm using a Corsair CS550M PSU in my pc now, will that be enough ? And I don't think I'm going for SLI.
That one should work fine for a single gpu system.
Robin_40 :
And I want to put the 4 Corsair Air Series AF120 in the case for air flow or wouldn't it work becouse it's an open case ?
They will have no benefit other than lighting up the place.The components that really need active cooling have that,cpu+gpu+psu,and the rest will loose it's heat by the natural flow of the air since an open case.
Robin_40 :
Now i have 2 BitFenix Spectre LED PWM 14cm can I replace them with the 2 fans from the CPU cooler ?
You could use those on let's say a H110i GTX or H115i GTX from Corsair for instance.A 280mm aio watercooler like those.Other brands have them too like cooler master,NZXT or Swiftech.Well like these,
http://tweakers.net/categorie/491/waterkoeling/producten/#filter:FYsxCoAwEAT_svUV3iXKxQcIFr5ALDRJEVCRaCFI_q5WwzDMgyXPe-jDiXYUbUickhomUWPIMhOzVBPhyMnHIe1oK8J5RN-l9Yr52x6Iq-Xn9mcIawPCNt-f1NY6lFJe
The Cryorig would be a nice choice.It even has some active vrm cooling.I just hope that the tube are long enough to have it in the right direction.Some info about the length of the tubes,
Flexible black rubber hoses are in use on the A80, with the tubing length coming in at 350 mm, which is just shy of fourteen inches. Looking at competing 280 mm units, we find that the NZXT Kraken X61 has tubing that rings in at sixteen inches. Our Corsair H110I GTX has hoses that ring in at at about twelve inches.
Got that from
a review by "Legitreviews".
I don't think there are tower coolers where these would work.Most,all i know,tower coolers even when using 140mm fans still use fans that have spacing of the holes at 120mm so the retention clips wouldn't work with the spectre fans.