- Sep 6, 2010
- 28
- 0
- 18,530
So here is the setup:
i7 5820K
AsRock X99 Extreme4
Lucifer V2 Cooling Fan
XFX Radeon 7970 x2 Crossfired with Bridge
8GBx4 Corsair Vengeance DDR4 RAM
Cooler Master HAF X
1200W Ultra PSU
So I just ordered the GTX 1080 and was uninstalling one of the 7970's to put in my server whose video card died. I had one 7970 in PCI slot 1 and the other in PCI slot 3. I removed the video card in slot 3 and installed in the server. When I powered up the server, everything was fine. When I powered up my gaming rig, there was no display and I heard 5 long beeps then the successful POST beep from the motherboard. I powered down and swapped video cards putting the video card in the AsRock in slot 3. Powered up and had the same issue. Then I returned the video cards to their normal positions. Powered up and this time it was only the successful POST beep, but still no display. I verified that everything was reconnected as before and the system had been working flawlessly up until today. Can anyone assist?
i7 5820K
AsRock X99 Extreme4
Lucifer V2 Cooling Fan
XFX Radeon 7970 x2 Crossfired with Bridge
8GBx4 Corsair Vengeance DDR4 RAM
Cooler Master HAF X
1200W Ultra PSU
So I just ordered the GTX 1080 and was uninstalling one of the 7970's to put in my server whose video card died. I had one 7970 in PCI slot 1 and the other in PCI slot 3. I removed the video card in slot 3 and installed in the server. When I powered up the server, everything was fine. When I powered up my gaming rig, there was no display and I heard 5 long beeps then the successful POST beep from the motherboard. I powered down and swapped video cards putting the video card in the AsRock in slot 3. Powered up and had the same issue. Then I returned the video cards to their normal positions. Powered up and this time it was only the successful POST beep, but still no display. I verified that everything was reconnected as before and the system had been working flawlessly up until today. Can anyone assist?
Facebook
Twitter
Instagram