My MSI 970-G46 motherboard gets stuck on A2 boot code and only way to continue booting is to press DEL and it eventually drop me into UEFI BIOS and i can just continue booting from there but, why does this happend? Its annoying the ever living heck out of me. Also around the same time this started to happend my DVD drive stopped being detected in Windows and BIOS but it's working and is properly connected but simply wont get recognized So what should i do? I think i should flash the BIOS but i'm keeping that for the last resort
-
T-Mobile Home Internet: Revisiting 5G connectivity for the home after two years
-
Multi-million dollar Cheyenne supercomputer auction ends with $480,085 bid — buyer walked away with 8,064 Intel Xeon Broadwell CPUs, 313TB DDR4-2400 ECC RAM, and some water leaks
Stuck on A2 on boot
- Thread starter LuckYNzm
- Start date
Solution
Ironsounds
Champion
- Jul 31, 2011
- 10,403
- 4
- 56,960
Hello... sounds like Bioi's Boot problem... wanna try B /
take your time here and be slow and careful to your MB... look in your MB manual/Pdf for pictures and location of the pins. B )
1) un-plug PS from wall.
2) remove MB battery
3) place jumper pins/switch on MB to clear the capacitors... for ~3 mins
4) remove Jumper/switch
5) re-install battery
Look in your manual for the correct RAM slots you want to use/test for "Dual channel" operation with this MB.
6) re-move and re-seat your RAM sticks into the MB for the DUAL channel memory operation slots.
7) plug monitor into the MB video output
8) plug in PS to wall
9) Boot computer.
take your time here and be slow and careful to your MB... look in your MB manual/Pdf for pictures and location of the pins. B )
1) un-plug PS from wall.
2) remove MB battery
3) place jumper pins/switch on MB to clear the capacitors... for ~3 mins
4) remove Jumper/switch
5) re-install battery
Look in your manual for the correct RAM slots you want to use/test for "Dual channel" operation with this MB.
6) re-move and re-seat your RAM sticks into the MB for the DUAL channel memory operation slots.
7) plug monitor into the MB video output
8) plug in PS to wall
9) Boot computer.
TRENDING THREADS
-
News Apple debuts M4 processor in new iPad Pros with 38 TOPS on neural engine- Started by Admin
- Replies: 67
-
News Firefox user loses 7,470 opened tabs saved over two years after they can’t restore browsing session
- Started by Admin
- Replies: 55
-
News Intel issues official statement on Core K-series crashes: stick to Intel's official power profiles
- Started by Admin
- Replies: 15
-
Question Sapphire RX 5700 XT Nitro+ is not working in main PCIe slot ?
- Started by digows
- Replies: 24
-
Question I replaced my broken Mother Board and now my windows wont start- Started by Crystal_B
- Replies: 18
Facebook
Twitter
Instagram