Windows Boot Manager/UEFI fail

Toggle sidebar Toggle sidebar
B

Broadshateme

Commendable
Jun 20, 2016
1
0
1,510
After an improper shutdown, my laptop boot ends after BIOS. Going into the BIOS the HDD is visible. It is set to use UEFI secure off. Choosing windows boot manager or the UEFI for the HDD goes to the blank screen with no activity shown on the HD monitor light. I do not have a recovery disk. Cannot boot in legacy from HDD.
13509862_10154100821976539_688196860_o.jpg
 
Solution
SuperSoph_WD
Welcome to the TH community, Broadshateme!

I'd advise you to attempt to resolve the issue by resetting BIOS from the settings in the BIOS interaface. If that doesn't help, I'd suggest you to check your computer/motherboard manufacturer's official website and check if your model has any new BIOS versions. You might need to update it, but make sure you follow the mobo/PC manual's step-by-step instructions on the matter.

Hope it helps. :)
Cheers,
SuperSoph_WD
Sort by date Sort by votes
SuperSoph_WD

SuperSoph_WD

Glorious
Jul 30, 2014
6,758
3
45,960
Welcome to the TH community, Broadshateme!

I'd advise you to attempt to resolve the issue by resetting BIOS from the settings in the BIOS interaface. If that doesn't help, I'd suggest you to check your computer/motherboard manufacturer's official website and check if your model has any new BIOS versions. You might need to update it, but make sure you follow the mobo/PC manual's step-by-step instructions on the matter.

Hope it helps. :)
Cheers,
SuperSoph_WD
 
Upvote 0 Downvote
Solution
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom