My MSI Z170A TOMAHAWK AC motherboard has build in LED's that indicate malfunction or errors. I know this because I made these errors happen a few times during my build. Now that I build my pc the proper way and everything seems to work(mouse/keyboard turn on), my monitor doesnt seems to recieve a signal from my motherboard still. I tried resetting the BIOS and I know the cpu and ram are working (according to the LED's)
my motherboard's ez debug leds are off, yet my motherboard doesnt send any signal to my monitor? (So cant enter BIOS)
- Thread starter Kasper_2
- Start date
- Oct 7, 2009
- 53,904
- 4,711
- 173,390
1| Have you tried breadboarding your system and seeing if the system boots up with the iGPU connectivity options while only on one stick of ram? You should run that one stick of ram in DIMM 2, per your manual.
2| Speaking of ram and GPU's, when dealing with troubleshooting threads, it's customary to pass on your full system's specs.
3| Did you try remove the CMOS battery for 15 minutes before replacing it?
2| Speaking of ram and GPU's, when dealing with troubleshooting threads, it's customary to pass on your full system's specs.
3| Did you try remove the CMOS battery for 15 minutes before replacing it?
TRENDING THREADS
-
-
-
News US sanctions transform China into legacy chip production juggernaut — production jumped 40% in Q1 2024- Started by Admin
- Replies: 31
-
RTX 4070 vs RX 7900 GRE faceoff: Which mainstream graphics card is better?
- Started by Admin
- Replies: 70
-
Question I have been stuck between NVMe and SATA SSD. What should I do now?- Started by maniac2556
- Replies: 19
-
Question New pc build r9 7900x3d rtx 4080 super no post only ram rgb turns on- Started by Harvey Durward
- Replies: 5
-
Question 1TB HDD 80% Fragmented, Windows 10 Optimise Drives Program Doesn't Help
- Started by sdfbvcxbf
- Replies: 7
Facebook
Twitter
Instagram