Intel Desktop Board DZ68BC will not boot to BIOS

[Magnarider]

I have a Intel DZ68BC that I just bought used. I have just put it in a case to test it and see what I got. I have installed a i3-2100 and 8 gb 1066 RAM 600 watt psu. I have got it to boot in to the BIOS just once or twice but now I get nothing the board lights up but no post codes on the board for troubleshooting. I have no Hard Drive installed and no OS because I havent got that far to install one. I think there is a BIOS problem can anyone give me some help or have any ideas what I can do?

Thanks

 

[Emerald]

have you tried resetting the BIOS?

 

[Magnarider]

Yes but I think it needs recovered and I dont know what version it is but then again it might have more severe problems. I had an OS installation USB flash drive in it that I had forgotten about and I went to get a drink and I stepped away from the computer for a minute and when I came back it had booted to the windows installation screen, but I didnt have a HDD in it so I properly shut it off from inside the installation usb. I plugged in a HDD and rebooted and it would not work. So I unplugged the HDD and I tried to reboot the usb and it still would not do anything so I unplugged everything but still no change and thats where im at just a black screen.

 

[Magnarider]

If I had plugged the HDD in while it was powered on at any point would that cause this to happen?