So this is my first thread on here and hopefully something someone can help me with,
I have myself an 970 Extreme3 R2.0 - Now apart from the Random Hard freezes every so often during browsing this board has been excellent and is my main setup for my Rig.
I had originally Kingston Hyper X DD3 1866Mhz sticks into Slot A1 And B1 Total 8GB
I've decided to purchase the same Ram and use the remaining slots A2 and B2 Total 8GB
However when i install ram onto these slots and switch the pc on i just get a black screen not bios flash screen nothing just pure black!
I've removed the sticks from both slots had a jiggle around to see if they was faulty but they work fine with just two slots used even though it's the same RAM.
I've updated Bios, left everything to Auto and reset Bios settings through UEFI
But nothing still works, tech support is a nightmare to get hold of, im hoping someone can shed light onto helping me here, or do i give up and throw this board into the Bin and go down the Asus Route...
Thanks !
I have myself an 970 Extreme3 R2.0 - Now apart from the Random Hard freezes every so often during browsing this board has been excellent and is my main setup for my Rig.
I had originally Kingston Hyper X DD3 1866Mhz sticks into Slot A1 And B1 Total 8GB
I've decided to purchase the same Ram and use the remaining slots A2 and B2 Total 8GB
However when i install ram onto these slots and switch the pc on i just get a black screen not bios flash screen nothing just pure black!
I've removed the sticks from both slots had a jiggle around to see if they was faulty but they work fine with just two slots used even though it's the same RAM.
I've updated Bios, left everything to Auto and reset Bios settings through UEFI
But nothing still works, tech support is a nightmare to get hold of, im hoping someone can shed light onto helping me here, or do i give up and throw this board into the Bin and go down the Asus Route...
Thanks !