My GPU/CPU/DRAM LEDs are all off and my Motherboard won't boot (out of the box build).My relevant parts list:Intel i7

Toggle sidebar Toggle sidebar
T

Tybrosion

Commendable
Jul 2, 2016
3
0
1,510
Troubleshooting Help:

My Relevant Parts List

Intel i7 6700k 4.0GHz

CORSAIR Vengeance LPX 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2400 (PC4 19200) Intel X99 and 100 Series Desktop Memory Model CMK16GX4M2A2400C16

MSI GTX 1070 Gaming X GPU

ASUS Z170-A LGA1151 Intel Z170 HDMI USB 3.1 ATX Intel Motherboard

EVGA 220-G2-0850-XR 80 PLUS GOLD 850W ECO Mode Fully Modular NVIDIA SLI Ready and Crossfire Support Continuous Power Supply


I'm building a PC and I'm in the stage where I'm trying to verify my motherboard is working with my CPU/GPU/Memory. When I turn the motherboard on, the power LED lights up and that's it. However, all the components are getting power from the power suppy (CPU gets warm, cooler fans when attached run, GPU lights up and fans spin). When connected to the monitor, there is no signal. Also, no beeps or boops of any kind.

I've disassembled and reassembled the entire motherboard, tried various connections to the monitor (DVI/VGA/DVI), and attempted to reset the CMOS, all to no avail.

Is my motherboard fried? Am I missing something simple? Any help is greatly appreciated!
 
Sort by date Sort by votes
Zerk2012

Zerk2012

Titan
Ambassador
Oct 6, 2014
21,397
2,038
104,240
Just to make sure you have the 8 pin, 24, power connectors connected to the motherboard, and the power cable to the video card with the monitor hooked up to the video card.
Remove your memory and try 1 stick at a time in each ram slot. If nothing with that stick of memory then try the same thing with the other stick.
If still no go them remove the video card reset CMOS hook the monitor up to the motherboard (report back)
 
Upvote 0 Downvote
T

Tybrosion

Commendable
Jul 2, 2016
3
0
1,510


Hi. I tried all those steps, including popping the motherboard battery out and "resetting" it and still have no change. The power light still comes on and nothing else. It's all obviously receiving power but it's not communicating. Could it be a faulty cable or maybe incompatible RAM (though I'm like 99.9999% sure it's compatible RAM)? Or is the CPU incorrectly installed (it's definitely receiving power)?

Thanks again for your help.

Edit: Oh, and the "xLed" is on as well.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom