Compatible replacement options requested please

Micah0317

Commendable
Jul 9, 2016
2
0
1,510
I am looking for a compatible replacement for my
hynix 1gb 1rx8 pc2-6400u-666-12 (Hynix HYMP112U64CP8-S6 PC2-6400U-666 1GB 1Rx8 240-pin DIMM, Non- ECC DDR2 Desktop Memory)
and also my
ProMOS 512mb 1rx8 ddr2-800Mhz (ProMos 512mb ddr2-800mhz-cl6 V916764K24QCFW-G6 240 PIN PC2-6400 DDR2-800 SDRAM)

.....any and all help will b much appreciated, and if u like a little on why it is a good/compatible replacement part. Please and thank you in advance for your time, effort and consideration in this matter.

Post edited with punctuation and grammatical layout for easier comprehension.
When making clear concise posts, you are bound to get better hits/responses.
Moderator
Lutfij
 
Solution
1| You're going to have to provide a lot more info than what you've given primarily what board and processor you're using in tandem with the aforementioned ram modules.

2| It's highly advised to not run two different sticks of ram as they are considered to be similar to a pair of shoes. They may depict near similar specs but in essence it's not the same shoe on each foot although it may run in dual channel mode (showing in BIOS).

3| You should be looking at a kit of DDR2 ram i.e 2x XYZ DDR2 666/800MHz(depending on the maximum frequency your board and/or memory controller can handle).

Lutfij

Titan
Moderator
1| You're going to have to provide a lot more info than what you've given primarily what board and processor you're using in tandem with the aforementioned ram modules.

2| It's highly advised to not run two different sticks of ram as they are considered to be similar to a pair of shoes. They may depict near similar specs but in essence it's not the same shoe on each foot although it may run in dual channel mode (showing in BIOS).

3| You should be looking at a kit of DDR2 ram i.e 2x XYZ DDR2 666/800MHz(depending on the maximum frequency your board and/or memory controller can handle).
 
Solution