TP-Link router Help needed

harmeet_randhawa5

Commendable
Jul 9, 2016
1
0
1,510
I bought TP-Link modem last month from china. TL-WR941N V6. I wanted to change the language but after I flashed firmware of English version and it got bricked. Now all the LAN port lights are on and no other lights are on. Its also not broadcasting SSID. And when I connect it with LAN nothing shows. I cant use it now. I downloaded the Chinese firmware file but I dont know how to flash because the router is not detected in the computer. How can I revert it back to any firmware? Chinese also will work just it should start working. Thanks for help.
 
Solution
I would try a hard reset to see if you can get any response after. HERE is a short guide on how to do that.

If that fails, you would need at least a JTAG cable to have any hope to repair it, which is not feasible for such an inexpensive router. In other words, if the hard reset fails, you need a new router.

RealBeast

Titan
Moderator
I would try a hard reset to see if you can get any response after. HERE is a short guide on how to do that.

If that fails, you would need at least a JTAG cable to have any hope to repair it, which is not feasible for such an inexpensive router. In other words, if the hard reset fails, you need a new router.
 
Solution