Hi, I am building my second computer, so I am not a veteran but I have seen everything before at least once.
However I am having a lot of trouble getting my new computer to boot.
The Basics:
Motherboard : Maximum Hero VIII Hero Alpha
RAM: Corsair Vengeance LPX 32GB DDR4 DRAM 3200MHz, I am using just 1 stick to try to post.
CPU: 6700k
PSU: PC Power & Cooling ZX Series OCZ-ZX1000W
Display is a Dell UltraSharp U2412M
The monitor is connected by a displayport (monitor) to hdmi (mobo) cable.
I have other components I'm trying to install later (drives, gpu, etc) but I just want proof this damn thing will boot.
When I start up the computer, the lights turn on and the fans spin, but no display goes to my monitor, and the error code gets stuck at "99", which is I/O initialization or sometimes "b6", which I can't find.
I have tried changing ram sticks and slots, and i even got a replacement identical motherboard with the same issue. I am not sure what to do.
However I am having a lot of trouble getting my new computer to boot.
The Basics:
Motherboard : Maximum Hero VIII Hero Alpha
RAM: Corsair Vengeance LPX 32GB DDR4 DRAM 3200MHz, I am using just 1 stick to try to post.
CPU: 6700k
PSU: PC Power & Cooling ZX Series OCZ-ZX1000W
Display is a Dell UltraSharp U2412M
The monitor is connected by a displayport (monitor) to hdmi (mobo) cable.
I have other components I'm trying to install later (drives, gpu, etc) but I just want proof this damn thing will boot.
When I start up the computer, the lights turn on and the fans spin, but no display goes to my monitor, and the error code gets stuck at "99", which is I/O initialization or sometimes "b6", which I can't find.
I have tried changing ram sticks and slots, and i even got a replacement identical motherboard with the same issue. I am not sure what to do.
Facebook
Twitter
Instagram