Will this Mobo fit in this case.

Toggle sidebar Toggle sidebar
Sort by date Sort by votes
Wayfall

Wayfall

Splendid
Dec 27, 2013
3,569
12
24,115
These are the only ones I can find online that I can compare with cases to see if they can fit:

Foxconn H61MXV LGA1155 Micro ATX
Foxconn H61MD LGA1155 Micro ATX
Foxconn H61AP LGA1155 ATX
Foxconn H61S LGA1155 Mini ITX
Foxconn H61MX LGA1155 Micro ATX

Was your board from a prebuilt pc as the third hole on the right side looks to low down to be installed in a normal case.

I'm not sure it will fit, I will have to do a bit more research.

 
Upvote 0 Downvote
A

Adrian_103

Commendable
May 8, 2016
10
0
1,510
Does anyone have any ideas?

I've done a little research, and could use some basic mobo help so I understand what's going on.

Basically my understanding is that the mobo screws into the rear of the pc case (looking into it side on)

So my current mobo http://support.hp.com/gb-en/document/c03135925 has what I think is 6 screws? They look like White circles, surrounded by a broken white circle?

If thats the case - Im basically trying to match those 6 screws, with a case with 'holes' in the exact same spots at the rear?

So if thats all correct - in my example - it does look like the 6th screw in the bottom right position doesn't line up with the case I linked - but the other 5 do?

And if thats correct - does the 6th one have to be screwed in - or will 5 of the 6 screws still be ok?

Hope that makes sense to someone.... :)
 
Upvote 0 Downvote
A

Adrian_103

Commendable
May 8, 2016
10
0
1,510
No-one has any ideas about how motherboards fit into cases?

I've given up hope on my original specific mobo / case question - but some general help from my previous question would be appreciated.
 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom