Asus M5A97 EVO R2 GPU detection error

navask01

Distinguished
Sep 2, 2013
349
8
18,865
Heyo all,

My mobo is now misbehaving. Or at least it's the mobo that is failing, i think.

I now can't even power up my PC. When i do, i get the audio error code from the mobo saying that the GPU can't be detected. But the GPU is in the slot and is powering up - lights up and fans start spinning. But i don't have any output displayed on my monitor.

I thought it might be the slot that's started to go wonky and tested it on x4 slot.Just for testing purposes. Same thing - same audio error code despite the card powering up.

What should i now be doing to further diagnose what the problem might be? Idon't have a spare GPU to test at the moment.

The GPU in question is a MSI 290X Lightning and i have the Corsair TX750 PSU.
 

navask01

Distinguished
Sep 2, 2013
349
8
18,865
The following is the code legend from the manual:

BIOS Beep
Description

One short beep
VGA detected
Quick boot set to disabled
No keyboard detected

One continuous beep followed by two
short beeps then a pause (repeated)
No memory detected

One continuous beep followed by three
short beeps
No VGA detected

One continuous beep followed by four
short beeps
Hardware component failure

--

Mine is the third error - long beep with 3 short beeps. VGA is not detected despite it powering up.

Here's the link to the manual, if you're interested.
http://dlcdnet.asus.com/pub/ASUS/mb/SocketAM3+/M5A97-EVO_R2.0/E8045_M5A97_EVO_R20_V2_WEB.pdf

Check under section 2.4