Hi, I've built my first PC yesterday. I have a i7-6700k, and am using a h100i v2 cooler.
The problem I've ran into is when benchmarking my rig(3DMark), the fans rev up, but 15 mins AFTER the benchmark, when the CPU load is around 5% and the temps are around 30, the fans are still on full throttle.
Corsair links indicate that they are spinning at around 1000 RPM. The other thing is that before benchmarking, I can hear the fans going up and down whenever the CPU peaks in temperature, BUT the always go back down...
I've set my profile option to Quiet. What is the problem? Is it the hardware?
UPDATE:
I've just checked and some other people had the same issue. Apparently it may be because my fans are spinning depending on CPU temps instead of water pump temps, but where do I change this setting?
The problem now is that once the fans hit a high RPM they dont go back down when the CPU load and temps are back to idle temps.
The problem I've ran into is when benchmarking my rig(3DMark), the fans rev up, but 15 mins AFTER the benchmark, when the CPU load is around 5% and the temps are around 30, the fans are still on full throttle.
Corsair links indicate that they are spinning at around 1000 RPM. The other thing is that before benchmarking, I can hear the fans going up and down whenever the CPU peaks in temperature, BUT the always go back down...
I've set my profile option to Quiet. What is the problem? Is it the hardware?
UPDATE:
I've just checked and some other people had the same issue. Apparently it may be because my fans are spinning depending on CPU temps instead of water pump temps, but where do I change this setting?
The problem now is that once the fans hit a high RPM they dont go back down when the CPU load and temps are back to idle temps.