After installing new CPU cooler, no signal to monitor and reboot button doesn't work?

jonkkaaa

Commendable
Jul 14, 2016
3
0
1,510
So i installed new cpu cooler (Hyper 212 evo) and after installing pc wont get signal to monitor. It starts, mouse amd keybord have lights ( i can press caps lock). I tied to install the cooler again but it didint work. I tried removing rams one by one but no differens, removed gpu and cleened the ports but no differens. I tried to clear the CMOS by removing the battery for 30 minutes but no differense. I tried different monitor, different caple and different power caple. I have checked every caple... Every fan are working and pc is booting like allways but no signal.

When pressing reboot button, pc doesnt reboot and red light stays on like 5 secs on the motherboard

My specs: i5 2500k, asus p8967, hyper 212 evo cooler, gtx 760.

Can you guys help? Thanks!
 

jonkkaaa

Commendable
Jul 14, 2016
3
0
1,510


Yes i but little bit of thermal paste, like small ball. I didn't touch any inputs, but i have checked every caple and they are plugged.

 

jonkkaaa

Commendable
Jul 14, 2016
3
0
1,510


Yes they are plugged, i did not touch them at all. Reboot button is working but it doesn't reboot the system. Only DRAM led flashes like 3 secs and nothing happens.