AtNvme :
Could you list your Pre-Launch commands and Autoexec file commands?
This is either a installation problem, a command bad hardware.
It's most likely something to do with commands.
Pre-Launch Commands:
-console -novid -freq 144 -tickrate 128 -exec autoexec -high -processheap -threads 8
Autoexec:
//Rates
cl_cmdrate "128"
cl_updaterate "128"
rate "128000"
cl_interp "0"
cl_interp_ratio "1"
//OTHER
fps_max "300"
cl_disablefreezecam "1"
//HUD
hud_scaling "1"
//MOUSE&SENSITIVITY
zoom_sensitivity_ratio_mouse "1.0"
m_customaccel "0"
m_customaccel_exponent "1"
m_customaccel_max "0"
m_customaccel_scale "0.04"
m_mouseaccel1 "0"
m_mouseaccel2 "0"
m_mousespeed "1"
m_rawinput "0"
m_pitch "0.022"
m_side "0.8"
m_yaw "0.022"
//MODEL ALIGNMENT
viewmodel_presetpos "3"
cl_righthand "1"
cl_bob_lower_amt "0"
cl_bobamt_lat "0"
cl_bobamt_vert "0"
cl_viewmodel_shift_left_amt "0"
cl_viewmodel_shift_right_amt "0"
//CROSSHAIR
cl_crosshairstyle "4"
cl_crosshairgap "-3"
cl_crosshairalpha "99999"
cl_crosshaircolor "1"
cl_crosshaircolor_b "0"
cl_crosshaircolor_g "255"
cl_crosshaircolor_r "255"
cl_crosshairdot "0"
cl_crosshairsize "6"
cl_crosshairthickness "1"
cl_crosshairusealpha "1"
sensitivity "3"
cl_crosshair_drawoutline "0"
cl_crosshair_outlinethickness "1"
//BRIGHTNESS
mat_monitorgamma "1.6"
mat_monitorgamma_tv_enabled "0"