This may sound dumb but, how do I connect case fans on my pc straight to psu just using the molex male and female ends. I really wanna do this without any adapters. Pls help!!
if you have a fan with a molex plug on it it will typically be dual sexed, male on one side female on the other.
the molex from the power supply are male, plug the male (psu) into the female (fan)end, you can then use the male end of the dual sex fan plug to connect another fan.
the dual sexed plug enables many fans on a single molex plug from the PSU.
usually the male plugs into the female.
if you are missing one of those then you are left with creative engineering, Ie. cutting and splicing the wires directly which I wouldn't suggest.
if you have a fan with a molex plug on it it will typically be dual sexed, male on one side female on the other.
the molex from the power supply are male, plug the male (psu) into the female (fan)end, you can then use the male end of the dual sex fan plug to connect another fan.
the dual sexed plug enables many fans on a single molex plug from the PSU.
Can I connect 1 fan on 1 molex connector instead of putting more than 2. I currently have 5 molex(psu) connectors and 5 fans. Those 5 molex connectors on the psu are occupied by the fans. Is this ok?