Corsair H75 CPU cooler - Change fan's to 140mm
- Thread starter magnuzen
- Start date
Solution
synphul
Champion
- Mar 11, 2011
- 9,477
- 7
- 54,965
I don't think the 140mm fans will fit without using an adapter, since the fans are larger the mounting holes are further apart and won't line up with the radiator. There are adapters out there that are a sort of cone shape that may work.
The other issue is static pressure, an important spec of the fan used on the radiator. Static pressure determines how much 'oomph' is pushing the air through the radiator fins, low static pressure could significantly reduce airflow (and cooling). The larger a fan gets the more difficult it is to maintain the same static pressure.
This is an example of the adapter I was referring to.
https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U
You can try it but your cooling performance may not be as good as it was with the original fan.
The other issue is static pressure, an important spec of the fan used on the radiator. Static pressure determines how much 'oomph' is pushing the air through the radiator fins, low static pressure could significantly reduce airflow (and cooling). The larger a fan gets the more difficult it is to maintain the same static pressure.
This is an example of the adapter I was referring to.
https://www.amazon.com/Bgears-Cooling-Fan-Adapter-140mm-Black/dp/B0043GMY1U
You can try it but your cooling performance may not be as good as it was with the original fan.
TRENDING THREADS
-
-
Question New installed W11 on sdd, D drive (HDD) goes to the 100% in seconds
- Started by Emily_Vin
- Replies: 8
-
-
Facebook
Twitter
Instagram