So i built a pc. Turned it on. Then saw that it only detected one ram. So i looked in my pc and saw that i didnt seat one stick of ram correctly. So i fixed it. And turned my pc on. Fans on. Power LED on. But my monitor said no signal.
So i messed with this for a while and tryed different combinations of ram going in different slots. After i finnally was able to get signal on my monitor again it still only showed one ram detected. So i messed with it some more and when it went on again it showed the ram that was detected was in a different slot that it had previously.
Im stumped so if anyone knows what to do.
Extra info: 2x4gb hyperx ddr3 1600mz
So i messed with this for a while and tryed different combinations of ram going in different slots. After i finnally was able to get signal on my monitor again it still only showed one ram detected. So i messed with it some more and when it went on again it showed the ram that was detected was in a different slot that it had previously.
Im stumped so if anyone knows what to do.
Extra info: 2x4gb hyperx ddr3 1600mz