Asus Z97I-Plus dram led flashing red and cant boot

Trophyon · Jul 23, 2016

Hello! I just moved som part from one pf my rigs to my mini ITX build. I install the Corsair HX1000i, 8x2 of Corsair Dominator Platinum (CMD16GX3M2A1866C9) and Evga GTX 980ti. The system was fine for about an hour. Then it blue screened and yhe code I could read was memory management something.. I tried checking for any loose wired and of the ram was properly installed. It was. I used MemOk and nothing happens. The dram led is flashing all the time and I cant boot. All help is greatly appreciated.

Trophyon · Jul 23, 2016

Btw: CPU is 4690k not OC'ed. Same as ram runs ar 1333 atm. I had to reset bios settings to make it boot the first time.

geofelt · Jul 23, 2016

Try testing the ram with memtest86+
If no joy, try the sticks individually and in different slots.

You should probably also clear cmos to get all bios settings to default.

Trophyon · Jul 23, 2016

I don't know what memtest86+ is and i tried 3 different sets of ram and one in each slot as well. Then it just turns off and on continuously. But not with two in. Reset cmos is just rwmove the battery and reinstall it right?

Trophyon · Jul 23, 2016

I have no idea what to do now... The last thing I did after testing each slot of ram and all the types I had, was pressing the MemOk until itrebooted and its been just running like that for a long time. And nothing happens otherwise. I cant seem to get the cmos battery out. Its weirdly mounted on this board(vertically) I feel hopeless now. Sorry if my spelling is messed up. I'm using my phone for this

Search

Asus Z97I-Plus dram led flashing red and cant boot

Trophyon

Honorable

Trophyon

Honorable

geofelt

Titan

Trophyon

Honorable

Trophyon

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page