Motherboard isn't detecting any hard drives

Toggle sidebar Toggle sidebar
Dan_97

Dan_97

Reputable
Jun 27, 2016
67
0
4,660
I just got a new Gigabyte GA-F2A88XM-D3HP motherboard and as soon as I tryed to boot up it gave me the error " no bootable device!". Naturally I checked the bios and neither one of my two hard drives show up. I have tried all 3 available modes (RAID, IDE and AHCI) and none of them detect either of the drives. I know for a fact the hard drives are 100 percent functional. I have tried clearing the cmos and toggling settings in the bios but none of that has seemed to work.
 
Solution
IInuyasha74
ACHI is the mode you want usually.

Did you double-check the cables going into the hard drives? It could be the power cables or data cables are lose. Or if you have a modular power supply, the cable with the SATA power connectors could be lose.
Sort by date Sort by votes
Dan_97

Dan_97

Reputable
Jun 27, 2016
67
0
4,660


I've tried every sata port, plus I've already made absolutely sure they were completely tight. I'm absolutely sure it's not cable related no offense.
 
Upvote 0 Downvote
Dan_97

Dan_97

Reputable
Jun 27, 2016
67
0
4,660


I do have a modular PSU but nothing is loose.
Update: turns out the modular sata connector on the PSU was actually very slightly loose, thanks!

 
Upvote 0 Downvote
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Share this page

COMPANY
RESOURCES
FOLLOW
Top Bottom