Benq Signal not found

Zinon9

Commendable
Jul 2, 2016
21
0
1,510
Hello, i just bought a custom pc and a monitor the xl2411z monitor and i am connecting my monitor into my gpu gtx 1080 and it says no signal found both dvi and hdmi.
 
Solution

Using the physical buttons on the monitor, you may need to switch what input to use, try setting it to HDMI or DVI and see if they work then.

Zinon9

Commendable
Jul 2, 2016
21
0
1,510


Yes and yes also
Kingston HyperX Fury Black Kit DDR4 2133MHz 16gb (2 x 8GB)
Intel Core i7-6700k
Corsair Hydro H110i V2 Extreme Performance
Samsung SSD 850 EVO (Basic) Series
Corsair CS-Series CS850M
ASUS Z170 PRO Gaming
MSI GeForce GTX 1080 Founders Edition
 

Okay, do you have another, suitable PC to test the card in? Or another card to test in your new PC?
 

Zinon9

Commendable
Jul 2, 2016
21
0
1,510


Nop this is my 1st pc ever. Also when i go to open the nvidia control panel to check in there it does not open. I uninstalled all the drivers and etc and it doesn't work. Also maybe do i have to change it from the motherboard bios?
 

It's possible that you need to change the default display adapter in the BIOS, although it should do this automatically. Check to see if it is set to use onboard graphics and change it to PCIE if it is (Also change it to PCIE if it's on auto)
 

Zinon9

Commendable
Jul 2, 2016
21
0
1,510
The only working display port as i checked is the vga of the motherboard. Not even the hdmi of the mothervoard and dvi. What do you guys think?
 

Using the physical buttons on the monitor, you may need to switch what input to use, try setting it to HDMI or DVI and see if they work then.
 
Solution