New Msi 1070 no display in Bios after installation

razeac

Reputable
Nov 29, 2014
7
0
4,520
I need help guys. I recently bought this new msi 1070. I previously had my gtx 660 on my pc. Pc specs are these : 3570k, gigabyte z77 d3h, New psu evga ex750b. windows 10 64bit.

I uninstalled the drivers of the gtx 660 using ddu. Installed the new card, and from boot up no display. I tried flashing bios, updated bios, reseating,used another slot, used the other power connectors from the psu, and almost everything on the internet and still no good. Whats weird is that upon bootup, i can see the card lighting up and fans spinning. I only used a dvi cable and hdmi cable. I already sent the card back to the seller for a check and they found out that the card has no problems.

I received the card again today and still the same hair pulling problem arise. I'm going nuts for this and I still have a half a month to send the card for a full refund. Placed the 660 again on the board and all works fine.. Do I need a new motherboard??? I can't imagine I have to go through these problems. If I change the mobo, then I am quite sure I will need a new windows10.
 
Solution
update i solved the issue now. I used another pci slot and for some reason, it showed display. Now I am afraid to use the previous pci slot. As long as this works its ok for me.

razeac

Reputable
Nov 29, 2014
7
0
4,520
update i solved the issue now. I used another pci slot and for some reason, it showed display. Now I am afraid to use the previous pci slot. As long as this works its ok for me.
 
Solution