Soo I brought this because the thunder [watch your language] up my pc and router soo I setupit via phone and I have no problems internetbut now I cant get into thw configuration site via ipadress I got it first time but now I cant get to the site
The problem is my psu burned up when the thunder storm hitted near my house intoelectric wire ao I brought the router few hours and I setup it via phone I typed the ip adress and it got me into tendas admin site but now I cant get into it
No problem, changing it back to automatic is to ensure that you do not get an IP conflict in the future if you have many people over with lots of devices.
Hej btw I have large space around the house and I want to buy 2-3 more routers and around 50m ethernet cabel too setup routers soo I can connect from any corner around the house what is the progress for that
If you plan to create a large Wifi like that I would recommend getting a switch through which the other routers (access points) can connect. However, you will need a couple of things first:
1) A working, always-on, broadband internet access with a DSL or cable modem. At the moment this is your Tenda.
2) One or more secondary routers to act as Access Points.
Here is a good guide: http://www.howtogeek.com/104469/how-to-extend-your-wi-fi-network-with-simple-access-points/
Thx btw I have modem and a router modem for internet wired and router for wireless is it possible to get multiply routers too work as a one access point
My idea is too get 2 more routers and make the ssid same soo I dont need to switch from one acces point to another just to make one single network access point and the second router just too boost the signal for the area where I cant get it is it possible? ?