PC spec
intel i7 6700k skylake msi gtx 1070 hyper x savage 32gb ram msi z170a carbon black MB nepton 240m water cooler EVGA 850W g2 PSU
new built pc
my new motherboard brand new from the box did boot from the beginning off fans kicked in at max speed everything lighten gpu water cooler everything. but no display on the screen. then after that the pc didn't start so i went through the normal checklist i found in here, nothing worked so took out the cpu and then the motherboard booted and fans were spinning and gpu and cooling worked. but whenever i put the cpu in it wont even power on.. i testet everything on my current old build everything works. but cant test the cpu due it's an lga 1151 socket my old pc got an 1150 socket. i did notice some pins were bent. and some were broken. but i was being super gently and did align the triangle with the mobo triangle and read the manual about 50 times i called tech support with no luck. so is the mobo fault because of the pins or the cpu? it powers with no cpu but when i add the cpu to the damaged pins it wont power. is it to protect the cpu or is it dead as a fly?
intel i7 6700k skylake msi gtx 1070 hyper x savage 32gb ram msi z170a carbon black MB nepton 240m water cooler EVGA 850W g2 PSU
new built pc
my new motherboard brand new from the box did boot from the beginning off fans kicked in at max speed everything lighten gpu water cooler everything. but no display on the screen. then after that the pc didn't start so i went through the normal checklist i found in here, nothing worked so took out the cpu and then the motherboard booted and fans were spinning and gpu and cooling worked. but whenever i put the cpu in it wont even power on.. i testet everything on my current old build everything works. but cant test the cpu due it's an lga 1151 socket my old pc got an 1150 socket. i did notice some pins were bent. and some were broken. but i was being super gently and did align the triangle with the mobo triangle and read the manual about 50 times i called tech support with no luck. so is the mobo fault because of the pins or the cpu? it powers with no cpu but when i add the cpu to the damaged pins it wont power. is it to protect the cpu or is it dead as a fly?
Facebook
Twitter
Instagram