Alrighty so a bit of a problem. I bought a new 8GB stick of RAM, DDR Corsair XMS, it's identical to my other stick BUT for the part that the new one is 1600mhz, while the old is 1333mhz. Now in my old motherboard there was seemingly no problems, however since then I have upgraded to a new CPU and motherboard and the stick simply won't run.
Whenever I insert the stick, before, if it was solo or together with the other one, just infinite boot loop, I couldn't even get into bios. Now I changed some BIOS setting to automatically have the DRAM frequency at 1333mhz instead of ''Auto'', however now instead of just constantly restarting and looping, it just starts up once, fans work and stuff, however just black screen and nothing happens.
Motherboard = asus b85m-g plus/usb 3.1
CPU = Xeon E3 1231 V3
GPU = R9 380 MSI Gaming edition
PSU = Seasonic S12II-620
RAM = Corsair XMS3 8GB (1x 8GB) 1333MHz DDR3 RAM = Old stick that works perfectly.
= Corsair XMS3 8GB (1x 8GB) 1600MHz DDR3 RAM = New stick, doesn't work in new motherboard.
Just saw that the new stick has a Latency Timing: CL11 while the old has a CL9, does that change anything?
Whenever I insert the stick, before, if it was solo or together with the other one, just infinite boot loop, I couldn't even get into bios. Now I changed some BIOS setting to automatically have the DRAM frequency at 1333mhz instead of ''Auto'', however now instead of just constantly restarting and looping, it just starts up once, fans work and stuff, however just black screen and nothing happens.
Motherboard = asus b85m-g plus/usb 3.1
CPU = Xeon E3 1231 V3
GPU = R9 380 MSI Gaming edition
PSU = Seasonic S12II-620
RAM = Corsair XMS3 8GB (1x 8GB) 1333MHz DDR3 RAM = Old stick that works perfectly.
= Corsair XMS3 8GB (1x 8GB) 1600MHz DDR3 RAM = New stick, doesn't work in new motherboard.
Just saw that the new stick has a Latency Timing: CL11 while the old has a CL9, does that change anything?