I have recently bought 5.1 system. When I connect to my computer it work as 2.1 instead of 5.1. When I go to Realtek control panel (I already selected system to 5.1) and play test, it only play sound through front left and right speakers, rest all speakers (subwoofer, central and rear speakers) play no sound.
While searching on this issue on internet I found some solutions which I tried, but no success
I tried to change settings in realtek control panel and sound properties in windows control panel.
One solution I found is disable integrated audio from bios, but this won’t work as I didn’t installed sound externally, but as no solution was their I did this as well. But as expected, it didn’t work.
Please help me to fix this issue. Below are my system details;
Motherboard: Gigabyte H97 D3H
Audio: Realtek ALC1150 115dB SNR HD Audio with built-in rear audio amplifier
Audio Details:
1. Realtek® ALC1150 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF Out
5.1 System: Philips SPA 7000B/94
Operating System: Windows 10 Pro 64 bit
Please help me on this.
While searching on this issue on internet I found some solutions which I tried, but no success
I tried to change settings in realtek control panel and sound properties in windows control panel.
One solution I found is disable integrated audio from bios, but this won’t work as I didn’t installed sound externally, but as no solution was their I did this as well. But as expected, it didn’t work.
Please help me to fix this issue. Below are my system details;
Motherboard: Gigabyte H97 D3H
Audio: Realtek ALC1150 115dB SNR HD Audio with built-in rear audio amplifier
Audio Details:
1. Realtek® ALC1150 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Support for S/PDIF Out
5.1 System: Philips SPA 7000B/94
Operating System: Windows 10 Pro 64 bit
Please help me on this.