- Mar 4, 2014
- 35
- 0
- 4,530
Hi I'm putting together a new system and I'm stuck on how to properly connect the front power up to the case. I know this is probably a dumb question but I don’t just want to guess.
I'm working with a Asus Z170-A ATX LGA1151 Motherboard and a Corsair 750D ATX Full Tower Case.
This is a link to the manuel
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwiuj-DPl6POAhUBRD4KHRNVBO8QFggjMAE&url=https%3A%2F%2Fwww.pugetsystems.com%2Ffiles%2F4809%2Fparts%2FMotherboard%2FAsus-Z170-A-11174%2FE10611_Z170-A_UM_V2_WEB.pdf&usg=AFQjCNG1zFU36S0anzN6aLEHOlw4bWFYhw&bvm=bv.128617741,d.cWw&cad=rja
Most of it make sense to me HDDLED,PWRSW,are both obvious. RESSET and my POWER LED + and POWER LED - I'm less sure what to do.
On page 1-30 the reset make no sense to me it's supposed to be a 2 pin connector but has 3 pins. they say Ground, RSTCON#,and +3V
Ground is usually negative right? That would make the writing on the plug face away not out the rest face out and it seems wrong to me.
I also have no idea where to connect the last two POWER LED + and POWER LED - at. Any help would be greatly appreciated.
I'm working with a Asus Z170-A ATX LGA1151 Motherboard and a Corsair 750D ATX Full Tower Case.
This is a link to the manuel
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0ahUKEwiuj-DPl6POAhUBRD4KHRNVBO8QFggjMAE&url=https%3A%2F%2Fwww.pugetsystems.com%2Ffiles%2F4809%2Fparts%2FMotherboard%2FAsus-Z170-A-11174%2FE10611_Z170-A_UM_V2_WEB.pdf&usg=AFQjCNG1zFU36S0anzN6aLEHOlw4bWFYhw&bvm=bv.128617741,d.cWw&cad=rja
Most of it make sense to me HDDLED,PWRSW,are both obvious. RESSET and my POWER LED + and POWER LED - I'm less sure what to do.
On page 1-30 the reset make no sense to me it's supposed to be a 2 pin connector but has 3 pins. they say Ground, RSTCON#,and +3V
Ground is usually negative right? That would make the writing on the plug face away not out the rest face out and it seems wrong to me.
I also have no idea where to connect the last two POWER LED + and POWER LED - at. Any help would be greatly appreciated.
Facebook
Twitter
Instagram