New System - Bad FPS. Where is the bottleneck? Palit GTX 1060 Dual

TehPenguin

Honorable
May 12, 2016
711
0
11,060
Hello and thank you for showing up!

I've built a new system:
EVGA 850 G2
Asus Strix X99 Gaming
i7-6800k @ 4.2 GHz
GTX 1060 @ 2.0 GHZ
32GB G.Skill 3200MHz CL14
m.2 SSD 950 Pro 512 GB - system + some games
SATA SSD SanDisk x400 1 TB - main gaming library
+some HDDs

My problem: I get around 1/3rd of the FPS count compared to what some reviewers get with this GPU.

Overwatch on Ultra: 50-60 FPS(instead of 140) - stored on the SanDisk SSD
Battlefront on Ultra: 35-40 FPS (instead of 80+) - stored on the m.2 Samsung SSD

I've built this PC yesterday. All drivers are up to date.

On paper, this system should not have any bottlenecks... so what am I missing?


EDIT: OK I found the culprit. It was a busted PCIe slot on my motherboard. Switched to the other x16 and everything works fine. RMA'ing a motherboard will be a pain, though...

Thanks to all of you that helped!
 
Solution
OK I found the culprit. It was a busted PCIe slot on my motherboard. Switched to the other x16 and everything works fine. RMA'ing a motherboard will be a pain, though...

Thanks to all of you that helped!

TehPenguin

Honorable
May 12, 2016
711
0
11,060
Here's a Screenshot from MSI afterburner. Couldn't figure out how to make a log file right now so a screenshot will have to do.
~30 min's Overwatch
PuvYjU.jpg

Will repeat this test with battlefront later.



 

TehPenguin

Honorable
May 12, 2016
711
0
11,060
Overwatch was indeed limited by my display. Turned it off and it went up to 80 avg. fps. Still not 120-140, though. Not that it matters in game, it's just a measurable difference in performance. A big difference.

Now to Battlefront! Dips as low as 35 and the game stutters pretty much all the time. I will test more games as they download.

UzxBjp.jpg
 


Memory clock seems like combined memory clock (clock of individual chips added up). If anything it actually seems rather low. It should be around 8000 MHz. OP, try increasing memory clock.
 

TehPenguin

Honorable
May 12, 2016
711
0
11,060
It's a Palit Dual 1060. The memory is actually already OC'd. It was at 4000MHz stock. 4,7 is as far as I can get before it becomes unstable. I googled a bit and it seems that all 1060 show 4000MHz memory clock in MSI Afterburner.

I read some people had similar issues and that it was a DPC(??) latency problem. nVidia released a hotfix for that, 368.95, I've installed it but it doesn't seem to have done much.

I also changed the power settings to "maximum performance" but no luck either. All that changed that the stable clock is now at around 2038 instead of 2012.
 

TehPenguin

Honorable
May 12, 2016
711
0
11,060
OK I found the culprit. It was a busted PCIe slot on my motherboard. Switched to the other x16 and everything works fine. RMA'ing a motherboard will be a pain, though...

Thanks to all of you that helped!
 
Solution

TehPenguin

Honorable
May 12, 2016
711
0
11,060


Yes, video editing. Well, photo editing, too, but it's not as demanding. The 1060 is enough for 1080p gaming :)