ASUS Z97-I Plus, not getting boot/black screen and no lights in KeyB or mouse

Trophyon · Aug 15, 2016

Newly built pc. No signal on screen, no lights in keyboard or mouse (connected to usb 2) green light beside ram, and red light beside CPU (Manual says it's DRAM led) The PC just turns on and off right after, stuck on loop. Some of the parts like the SSD has been in use before, and was not formatted. But I doubt that's the reason since it will be later on,

I have no idea what to do., so help would be greatly appreciated!

Mobo: ASUS Z97I-plus
RAM: Crucial Ballistix 1600 mhz, 2x8gb ddr3
CPU: Intel i5 4690k (no OC)
GPU: EVGA GTX 770 SC 4gb
Corsair TX750M PSU

Checked the GPU, PSU and RAM, nothing wrong with those when installed in other systems.

Sorry for bad picture.

alexoiu · Aug 15, 2016

Check if memory properly inserted (some require more force). Try leaving single RAM module installed and testing each slot.

Trophyon · Aug 15, 2016

alexoiu :

Forgot to mention that,. I did do all the above. Still nothing.

alexoiu · Aug 16, 2016

What are the last 4 digits on a sticker like http://www.guru3d.com/miraserver/images/2011/990fx-sabertooth/IMG_4499.jpg ?

Trophyon · Aug 16, 2016

alexoiu :

I can't see a sticker like that anywhere, guess i'll have to take everything apart then..

alexoiu · Aug 17, 2016

Bottom side, near the PCIe slot.

Trophyon · Sep 21, 2016

alexoiu :

Sorry for taking so long, I was caught up in alot of stuff, I hope you're still with me here! I found the number for you!

alexoiu · Sep 21, 2016

No problem.
CPU is supported. Try removing the CPU and see if any bent pins.

Trophyon · Sep 29, 2016

alexoiu :

I removed the CPU and no pins were bent. But I noticed something strange, I had used the intel stock cooler for a bit and it looked like it hadn't had proper contact with the CPU. I changed it to the H80i and assembled it all back. Still the same result as before. I was hoping so badly it was just the bad contact of the cooler that caused the problem. Now I have no idea.

alexoiu · Sep 30, 2016

Can you post a picture of the motherboard?

Trophyon · Sep 30, 2016

alexoiu :

How do you want it, with CPU out and everything?

alexoiu · Oct 1, 2016

Try taking the board out of the case, removing the CPU,and posting a picture of the CPU socket.

Trophyon · Nov 2, 2016

alexoiu :

I really hope I haven't taken to long for this but here goes! This is the best pictures I managed to take. Hope they suffice!

(hope pictures works this time! )

alexoiu · Nov 5, 2016

Pins look ok. If you haven't solved the problem so far, I suggest RMA-ing both board and CPU.

Trophyon · Nov 8, 2016

alexoiu :

I didn't mention this for some reason when posting this. BUT the mobo and th CPU had been in use for over a year. It was working perfectly before, but after reassembly it just stopped working. I was careful with static electricity, so it bugs me alot not figuring out what caused this.

Trophyon · Nov 17, 2016

So I recorded a short video clip of the mobo while the PC is running, I doubt it's gonna be more of help for any of you out there! But here it is anyways:
https://www.dropbox.com/s/3tej7bmikubjmow/MOV_0007.mp4?dl=0

Search

ASUS Z97-I Plus, not getting boot/black screen and no lights in KeyB or mouse

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

alexoiu

Titan

Trophyon

Honorable

Trophyon

Honorable

TRENDING THREADS

Latest posts

Moderators online

Share this page